Unifiber Carbon V2 Inside Wide Tail +60 - Elite

Lightweight Carbon Elite construction The Unifiber Carbon V2 Inside Tail +60 - Elite is made from high-grade pre-preg carbon and designed to deliver maximum stiffness at minimal weight. The high-performance lay-up provides direct load transfer and precise sail feedback, maintaining the responsive feel expected from the Carbon Elite range. Compact profile for wave and foil racing The inner boom tail width is 15.5 cm. This provides enough clearance for the sail while maintaining a compact and controlled feel. The geometry is well suited to wave sailing and foil racing in stronger winds, where quick rig response, control through transitions and a stable connection to the sail are important. Pulley outhaul system The boom tail features an integrated pulley system at the clew. It allows smooth and precise outhaul adjustment, making it easier to fine-tune sail tension as wind strength and sailing conditions change. Inside Tail construction The Inside Tail design means the boom tail slides inside the compatible boom body. The tube diameter is 21 mm. This slim construction helps keep weight low at the rear of the boom while maintaining high stiffness. Configure Me The Carbon V2 Inside Tail +60 - Elite is part of the Unifiber Configure Me modular boom system. Individual compatible components can be replaced, renewed or upgraded without replacing the complete boom. The boom tail works with selected Carbon HD Monocoque V2 and Carbon Elite Monocoque V2 boom bodies. Compatible with: Carbon HD Monocoque V2 140-200 Inside Wide Tail Carbon HD Monocoque V2 160-220 Inside Wide Tail Carbon Elite Monocoque V2 160-220 Inside Wide Tail Secure adjustment The adjustment range is +60 cm. Length adjustment is secured by Double Pin Locks mounted on the boom body. The twin-pin system keeps the boom tail firmly locked at the selected position and helps minimise unwanted movement under load.