Cobra Plastic Anti-Twist Washer M6 Set

Unifiber Anti-Twist Footstrap Washer Set Unifiber Cobra Anti-Twist Washer M6 is a two-piece plastic washer designed to reduce footstrap rotation around the mounting screw. It helps keep the strap in the selected position while riding. The set consists of an upper and lower washer, with the end of the footstrap clamped between them. Protrusions on the underside of the lower washer improve grip against the board pad, helping stabilize the mounting point and reduce twisting of the strap. Mounting options For a single-screw mounting setup on each side of the footstrap, both parts of the washer are used — the upper and lower sections. The footstrap can also be mounted with two screws on each side if the board insert layout and footstrap construction allow it. In this configuration, only the upper washer is used and the lower section is not required. Contents and compatibility One set includes one upper and one lower washer for one end of a footstrap. Two sets are required to secure both ends of one footstrap. Mounting screws are not included. Before purchasing, check that the washers are compatible with the footstrap and board mounting system. Select the correct screw length while taking into account the total thickness of the mounting setup.