Windsurf baseplate NeilPryde X-Base UXT

Low-profile UXT windsurfing baseplate NeilPryde X-BASE UXT is a windsurfing baseplate designed to make rig setup, transport and maintenance easier. Thanks to the removable tendon & pin unit, you do not need to remove the entire baseplate from the board after every session. This is useful if you sail often, carry your board in a boardbag or want to prepare your setup faster before the next session. Dual T-nut connection The baseplate uses two T-nut screws for a secure and stable connection with the mast track. This reduces the risk of the baseplate slipping while sailing and allows precise position adjustment on the board. You'll appreciate this especially when you stick to a single setting for a given board Removable tendon & pin unit The tendon & pin unit detaches in seconds. This makes transport, cleaning and storage easier without removing the base from the board. It is also practical when packing the board into a boardbag - fewer protruding parts mean less risk of catching or damaging other gear. Ultra-low profile for a closer rig-to-board connection The ultra-low profile reduces the gap between the sail and the board, supporting the Close the Gap setup. In practice, it helps keep the rig lower and closer to the deck, which can improve control and give the setup a more direct feel. The lower design also saves space during transport. Built-in T30 tool The UXT version includes an integrated T30 tool. This lets you make basic adjustments or remove the unit without searching for a separate key in your gear bag. It is a small detail, but one that can make setup on the spot much easier. Tougher tendon and safe finish The tendon joint uses a high-tech material that, according to NeilPryde, is around 50% tougher and more durable than conventional black compounds. The tendon is also easy to replace when needed. The safety rope is made from ultra-strong UHMWPE, while the rounded edges help reduce the risk of damaging the board, sail or boardbag during handling and transport. What this means on the water The X-Base UXT sits roughly 3-4 cm lower than NeilPryde’s previous extension. In practice this means the sail sits closer to the board, lowering the centre of force of the rig. The result is easier handling and better control — something both racers and freestylers will notice. One practical tip: because the sail sits lower with this baseplate, you can raise the boom slightly compared to your previous setup. This actually helps the sail work better and gives you a bit more room to work with. For position on the mast track: moving the baseplate forward gives more control, moving it backward gives a more direct feel. The dual T-nut connection means you can lock it precisely and it will stay exactly where you set it. The UXT version includes a built-in T30 Torx key in the head of the extension. This is the same key used for all screws on new JP-Australia boards — footstrap inserts, air valve and fin. If you ride a JP board, one baseplate covers all your beach adjustments without carrying a separate tool.