Twintip kiteboard Duotone TS Big Air SLS 2027

Competition Big Air – maximum load and release The TS Big Air SLS 2027 is built specifically for competition-level Big Air kitesurfing. Its shape is engineered to handle extreme edging loads, generate maximum tension before take-off, and release the board with explosive power. The model was developed with riders such as Finn Flügel. Its character is focused on high boosts, aggressive loops, and vertical take-offs. High stiffness and strong edge grip allow the rider to load the board hard before jumping, while the construction remains stable and controlled during demanding landings. Double Rocker Line Concept – grip before take-off The Double Rocker Line Concept channels water along two defined rocker lines, increasing traction during edging. This allows the rider to load the edge harder, build more tension before the jump, and maintain control right up to the release. A cleaner release translates into powerful pop and explosive take-offs required for Big Air riding. The concept also supports confident board tracking at high speed. Biax Carbon and Textreme Innegra – reactive Flex Pattern The SLS construction combines Biax Carbon with Textreme Innegra to create a highly reactive yet controlled Flex Pattern. The board loads energy efficiently under pressure and releases it quickly at take-off, providing crisp, repeatable pop for powered boosts and loops. Lightweight Innegra fibres also improve vibration damping. The board rides more smoothly through chop, helping maintain precise edge control during fast approaches while reducing impact transferred to the knees and back. Suspension Flex Cap – Reverse Flex control Suspension Flex Cap creates a very stiff center section while maintaining high torsional stiffness through a reinforced frame in the tips. The construction nearly eliminates Reverse Flex during landings and improves direct power transfer. The flatter center section also allows boots to sit more level on the board. This adds control during extreme edging and helps keep the board stable during heavy touchdowns. Hard Flex – aggressive response and powerful pop Hard Flex provides the most aggressive flex characteristics in the range. The increased stiffness supports dynamic take-offs and gives the rider precise control when the board is heavily loaded. This is especially important during vertical take-offs and hard landings, where the board needs to stay stable and react immediately to rider input. Angled Fins and Angled Rails – secure hold under heavy load Angled Fins increase grip and directional control during aggressive edging. They help keep the board locked on its line during hard load-ups, when forces are at their highest before take-off. Angled Rails further improve edge hold, upwind efficiency, and pop responsiveness. Together, these features create a stable platform for powerful Big Air take-offs in demanding kiteboarding conditions. Double Diffusor Bottom – stability on landings The Double Diffusor Bottom uses a dedicated tip geometry designed to maintain control in rough water and during hard landings. The shape helps absorb impact energy and stabilize the board on touchdown. This allows riders to land bigger jumps and more demanding tricks with greater control while reducing harsh reactions when the board reconnects with the water. Double Concave Bottom – grip and control in chop The Double Concave Bottom channels water along two concave lines, increasing grip, stability, and pop. The shape supports smooth planing, precise control, and responsive turning. The bottom design also helps maintain control after hard landings and in rough water, complementing the aggressive performance character of the TS Big Air SLS.